CT 60 Winter acrylic plaster stone texture
chevron_left chevron_right

Ceresit CT 60 Winter acrylic plaster stone texture

Designed mainly to produce finishing coats in Ceresit Ceretherm Winter building insulation systems.


100% Secure


Next Day Delivery Available


Return or change products


  • Manufactured in more than two hundred colours
  • Ready to use
  • Vapour permeable and hydrophobic
  • Resistant to weather conditions
  • Amount required:
    • CT 60 grain 1.5 mm approx. 2.5 kg/m2
    • CT 60 grain 2.5 mm from 3.8 to 4.0 kg/m2

CT 60 Winter is suitable for application on traditional plasters, concrete. It allows to continue the application at temperatures down to 0°C. Frost resistant down to -5°C within 8 hours after application. It conveys a densely arranged aggregate grain “stone” texture upon floating. It is suitable for indoor and outdoor use.

The substrates, on which the plaster CT 60 Winter will be applied, should be covered with neither frost, ice nor snow. CT 60 Winter can be applied on smooth, carrying, dry substrates free from grease, bitumen, dust and other substances decreasing adhesion:

– cement plasters and lime-cement plasters (age above 28 days, moisture ≤ 4%), concrete (age above 3 months, moisture ≤ 4%) – primed with the paint Ceresit CT 16 Winter,

– armoured layers made of Ceresit CT 85 Winter mortar (age above 4 days), primed with the paint CT 16 Winter.

Uneven and damaged substrates should be first smoothed and repaired. In case of traditional plasters and concrete substrates, Ceresit CT 29 plaster filler can be used. The existing dirt, layers of low strength, as well as elastic, lime and adhesive paint coatings should be removed. Absorbent substrates should be primed with the agent Ceresit CT 17, and then painted with Ceresit CT 16 Winter paint after minimum 4 hours. It is recommended to use the colour of the paint CT 16 Winter similar to the colour of the plaster. The plaster CT 60 Winter can be applied when the priming paint CT 16 Winter becomes completely dry (min. after 12 hours). The moisture coming from the substrate can cause the destruction of the plaster, therefore one should be assured that the adequate sealing layers have been made in the rooms (places) endangered with constant moisture. 

The whole content of the container should be carefully stirred. CT 60 Winter should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given homogenous structure with round movements by means of a plastic long float flatly held to achieve the appearance densely laid out aggregate grains structure. Do not sprinkle plaster with water! Work should be done on one surface without breaks, keeping the same product consistency. If there is a need to stop working, the self-adhesive tape should be applied along the previously fixed line. Then plaster should be applied, structure formed, and tape torn off with the plaster remaining on it. After a break, the application should be continued from the fixed place (the edge of the previously applied plaster can be protected with self-adhesive tape). Tools and fresh plaster stains should be washed with water, and the hardened plaster remains can be mechanically removed. Plaster renovation should be done by painting with Ceresit CT 42 and CT 44 acrylic paints as well as Ceresit CT 48 silicone paint.

Data sheet

Data sheet
CT60 Winter
grain 1.5mm - approx. 2.5 kg/sqm,
grain 2.5mm - 3.8-4.0 kg/sqm
25 kg