Ceretherm Express

Ceresit Ceretherm

EXPRESS

 

Highly durable and reliable insulation system. It shares all advanced features and excellent insulation properties with convenience of being extremely quick in installation.

Therefore it is an unbeatable solution in all cases, where time of completing an investment plays an important role.

Express installation & advanced durability

 

 

Impact Resistance Highly durable Convenient Express installation Self cleaning




CHARACTERISTICS


Ceretherm Express Products

  • express - etics installation quicker by 5 days!
  • self cleaning & dirt resistant
  • high durability
  • BioProtect formula
  • very low water uptake of the system
  • hydrophobic
  • high flexibility and resistance to mechanical damages & weather/temperature abrupt changes
  • lambda 0,040 w/mK of CT 84 – excellent insulation properties 25 times better then for
    cementitious eps adhesive
  • excellent working parameters:
    – easy & convenient application of CT 84 vs cementitious eps adhesives
    – easy & smooth application of mesh reinforced layer due to CT 87 optimized formula and
    consistency (new generation of fillers & organic modifiers; lower thickness and viscosity)
    – easier plasters application due to low water uptake of CT 87 & high adhesion strength
  • high efficiency per m2:
    – eps glueing higher efficiency by 100% vs cementitious eps adhesives
    – lower consumption of rendering mortar per m2 by 25%
  • glueing of eps in higher range of temperatures (0-40°C)

Recommended substrates: aerated concrete (dry) well ventilated building, ceramic blocks and even walls

Recommended buildings: single family houses, blocks of flats up to 11 floors (up to 25 m) and public buildings

Especially recommended for: buildings located in high air humidity areas and buildings located in air polluted areas (close to roads, industrial areas)

 

 

SPECIFICATION


1. Fixing
  • Ceresit CT 84 Express PU Adhesive
  • plastic anchors Ceresit CT 330 or CT 335 with a steel core or others classified as ETAG 014
  • number of fasteners and their arrangement should be determined by an architect, based on the substrate analysis and load calculations
2. Insulation material EPS-boards marked Ceresit CT 315 (or others classified as PN-EN 13163:2004) with thickness up to 25 cm, with a flat or shaped end face
3. Reinforced layer
  • Ceresit CT 325 Glass fibre mesh with a density of 145 g/m² and above
  • Ceresit CT 87 2in1 Adhesive and Reinforcing Mortar
4. Priming paint not necessary
5. Plaster

recommended: Silicone Plasters: Ceresit CT 74 „stone”, Ceresit CT 75 „rustic”;
others: Acrylic Plasters: Ceresit CT 60 „stone”, Ceresit CT 63 „rustic”, Ceresit CT 64 „rustic”; Silicate-silicone Plasters: Ceresit CT 174 „stone”, Ceresit
CT 175 „rustic”; Silicate Plasters: Ceresit CT 72 „stone”, Ceresit CT 73 „rustic”; Mosaic Plaster: Ceresit CT 77

6. Paint Acrylic Paints: Ceresit CT 42, Ceresit CT 44; Silicone Paint: Ceresit CT 48; Silicate Paint: Ceresit CT 54; Nanosilicone Paint Ceresit CT 49 Silix XD®